Gannet Sport - Mechanical Bait Release For Autel Evo 1

• A full automatic mechanical release series mainly used for fishing. As a full mechanical it does not require a battery or any electronics
• The lightest purpose-designed release in the world at only 13g, 7x lighter than its closest rival
• Designed not to interfere with your drones (Visual Positioning Sensors) VPS sensors in default optimal installation position. VPS remains ON
• Mounts in seconds to your drone with no tools required
• Over 4kg release ability (used on the Inspire 2 & custom drones)
• An Autel Evo can lift 1kg absolute Max, 600, 800g Max recommended bait, more possible but not recommended. Easy setting from 50g-800g when used on the Autel Evo
• Weight settings:
• On the Autel Evo, we recommend setting it to below 600g for general everyday use

Once the experience has been gained you may increase the settings to the drone maximum should you wish to fly very big baits in windy conditions. As a rule, we recommend setting it to carry 300-400g for more than your largest bait of the day (this on medium-heavy tackle, on light-medium tackle 100-200g) This reduces unnecessary stress on the drone.

• Because of it’s high accuracy, (±5% @ 800g setting) the release setting can be made higher than any other release, closer to the drone limit
• No need to modify your drone in any manner it simply clips or straps on
• Central loading the same as all other Gannets, balancing the load on all 4 motors, this is fundamental to all drones
• Central loading also distributes the load evenly to all 4 drone legs minimizing the stress on them as far as possible. See WARNINGS below for more details
• Lowest possible release point on the drone without adding leg extensions, See WARNINGS below for more details
• The entire release is installed below the radio antennas, which is in the drone legs, so it cannot interfere with signal or navigation at all
• Is activated whenever the pull force on the release line, the Drop-Loop, exceeds the user setting
• Designed for 0,3mm to 1,4mm Drop-Loops of either nylon or even metal

WARNINGS & CONCERNS REGARDING OTHER DESIGNS

• Some designs require yanking the line free due to the inability to set an accurate repeatable release force
• Some designs claim that they cannot be over tightened, this is a fallacy as different line diameters and line conditions like being dry & salted will
• Some designs force off-center loading, to any side, especially the back in order to clear the downwards VPS sensors
• There are designs that lift “near” the center but when they do they interfere with the VPS
• Some designs have pivot points higher than the drone legs in order that the bulky release head can swing away when landing
• Several designs weigh over 100g, any unnecessary weight added to the release is unnecessary power-sapping on the drone
• Gannet Sport with flat adapter for Autel Evo
• Instruction leaflet

Protected under several international Pending Patents and design registrations.

Numbers to follow.